Monday, October 11, 2010


What was once our guest bedroom has now been renovated with a fresh coat of Benjamin Moore's Titanium, some built-in Pax closets, a Schonbek crystal chandelier, new floors and crown moulding; to become our new nursery. I also took the opportunity to replace some mismatching baseboard, because staring at this kind of thing makes me crazy:

We resisted the temptation to make it super girlie and cutesy, figuring she may be changing rooms in a couple of years, and this would once again become a guest bedroom:

To bring the "baby" into the "baby room", we added the requisite items - a crib, a dresser/change table from Captain's Treasures, lamp and comfy chair, and of course the all important nurse-cessories. In our case we added a rug that my wife had in her room when she was a baby:

An original oil painting from talented Canadian artist - Amanda Hill:

A lamp from Homesense:

And here are the afters:

Wednesday, October 6, 2010

IKEA Love/Hate

The back bedroom, which will become our nursery is rather small and didn’t have a closet. So we thought about how we could incorporate some storage without eating up too much valuable floor space. The easiest thing to do would have been to frame up a small closet with bi-fold doors and install a rod to hang clothes from, but if you’re going through the trouble to build something from scratch, why not try to take it to the next level? While a framed closet with bi-fold doors and a single hanging rod is fine, it could be so much more functional with proper organizers and if it were built-in, it could become part of the architectural detail of the room. So we decided to do a semi-custom built-in (if that makes any sense). As our base we used IKEA’s Pax line of closets. It’s a bit strange (and maybe it’s just me), but anytime I think of IKEA I automatically start experiencing these mixed love/hate feelings. Love the prices, but hate the purchasing and eventual assembling experience, as well as the fact that no matter what you get 2 million other people will also have the exact same item.

As far as closets go, there's definitely more to love about the Pax system than hate. I love the price, the infinite combinations of organizers and the quality of the cabinets, drawers and hardware. What I hate is that no matter how many door styles IKEA comes up with everyone instantly recognizes them as being from IKEA. So we decided to customize ours. Many top designers take IKEA kitchen cabinets and customize them until they look like something that came from a high-end carpentry shop. One of my all-time favourite kitchen blog posts, by one of my all-time favourite design heros, talks about how to do this. So we figured why not apply that same creative thinking to the Pax.

Here’s what we did to disguise the ugly melamine side and make it look more like a custom built-in.

I started by building a solid level platform out of 2x6's and plywood:

Then I lifted the Pax units on to the platform and anchored them solidly to the back wall using toggle bolts. This is pretty key for safety reasons, cause if the units ever tipped forward, their weight could cause serious injury:

I then cut a piece of mdf to cover the melamine sides (these pieces are often referred to as gable walls), the space at the bottom (often referred to as the toe kick) and the space at the top (to extend the unit to the crown moulding, often referred to as a frieze). Mdf paints up really nicely, but the cut edges need to be sealed before painting in order to get a good finish. To seal the edges I just smear drywall compound on the edge and then sand it smooth once it dries:

We painted the IKEA doors that we got. The doors that we chose were actually really low quality basically it's a wood grained sticker over top of pressed mdf. The sticker surface of the doors doesn’t hold paint very well. Eventually we may order new custom doors should the paint start to get beat up. Anyhow to finish it all up, I installed baseboard, quarter round and crown moulding around the room to give the unit a built-in look:


  1. These suckers are heavy so bring some friends to IKEA to help you wrestle them onto your cart and through the checkout. I would recommend the IKEA delivery. Same day delivery is $10 cheaper.

  2. Again these suckers are big, heavy and awkward, so have friends help you when you assemble them or move them.

  3. The units have height adjustable feet at the front. These stupid things either fall out or come loose if you try to move the unit or even if you try to adjust the height. I built a level base so that i could just throw these stupid things away.

  4. I'd recommend cutting, sealing and painting the mdf before attaching it to the Pax units. Less mess and cutting-in with a paint brush.

  5. If one of your Pax units butts up against a wall, be sure to leave a bit of space between the wall and the unit, otherwise the doors won’t open wide enough to allow the KOMPLEMENT drawers to work. This space can be filled with a trim piece (i.e more painted mdf).
UPDATE:  Click here to see another set of built-in PAX go in to my master bedroom